Care and Maintenance
Cleaning and Maintaining Vinyl Windows
- Vacuum dirt and debris from sill and track areas before washing
- Clean glass and window or door frame with a mixture of mild dish soap and water. Rinse completely with clean water and wipe dry with a soft cloth to avoid water spots.
- Avoid washing glass in direct sunlight.
- Never use abrasive or caustic cleaners. They can cause permanent damage to the frame finish or the glass.
- Mild, nonabrasive soaps are usually the safest for most dirt and stain removal, but any cleaner you use should be tested in an inconspicuous area first.
- Always rinse completely with clear water and wipe dry if possible.
- Check to make sure drainage or “weep” holes are always clear of dirt and obstructions – both inside and outside the window or door in the bottom of the frame. Composite windows do not have weep holes. Note: If the window is “stacked,” there may be weep holes between units.
- Clean screens by removing them, washing them on a flat, clean surface with mild soap and water and a soft brush. Then rinse, wipe dry and reinstall.
- Windows and doors with moving parts include hardware components that should be lubricated periodically. In salt-air environments, these components require monthly lubrication.
- After wiping clean, use a silicone spray with a non-petroleum-based propellant on door or sliding window tracks, rollers and locking hardware For more information, including recommendations for cleaners, check out our Care & Cleaning Tips.
Cleaning and Maintaining Vinyl Windows
Re-seating the glazing bead on a vinyl window
Exposing the Accessory Groove in an Artisan Window
Changing an AMSCO Style Lock
Changing the AMSCO Sentry Lock on a Vinyl Window
Adjusting the keeper for the AMSCO Sentry Lock on a vinyl Window
Double Hung Window Balance Spring Replacement
Removing a nail-fin from a vinyl window
Squaring a Double-Hung Window Using the Jamb Adjuster
Cleaning and Maintaining Your Vinyl Window
Replacing a take out clip on a vinyl window
Adjusting the rollers on a sliding patio door
Replacing the Cam/Positive Action Lock On a Vinyl Window
Maintenance Tips
Keep Your AMSCO Windows® Products Looking Beautiful Season after Season.
While vinyl and composite products are low-maintenance and easy to care for, they will perform their best with some occasional attention. In rare cases, vinyl products can be affected by solar energy or chemicals that can cause a change in color – including fading, darkening or yellowing. In most climates and with many mild chemicals, a change may not even be noticed. In other cases, however, the color change may be more dramatic and become cause for concern.
Information from the American Architectural Manufacturers Association (AAMA), the Vinyl Institute (VI) and the American Society for Testing and Materials (ASTM) will help you to avoid these problems and enjoy your windows for many years to come.
Condensation & Your Windows
The presence of condensation on the interior surface of your AMSCO Windows is not an indication that your windows have failed or that you have bad windows. In fact, the presence of condensation can be a sign that your home is built air tight.
- Know and understand the sources of humidity in your home
- Adjust the relative humidity levels in your home Keep the humidity levels below 40% under normal conditions, During cold weather, drop the humidity to 20% or lower depending on how cold it gets
- Always run exhaust fans when cooking or showering
- Open your blinds or drapes to allow air to circulate around your windows
AMSCO Windows
1880 South 1045 West PO Box 25368 Salt Lake City, Utah 84125
Quick Links
Copyright © 2025 Windows. All rights reserved. Brite, CōzE, Make Your Home a Masterpiece, and AMSCO Windows are registered trademarks of AMSCO Windows. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. All other registered and unregistered trademarks herein are the sole property of their respective owners.
AMSCO Windows 2025 all rights reserved